Plane waves in a semi-infinite fluid saturated porous medium

The field equations governing the propagation of waves in an incompressible liquid-saturated porous medium are investigated and a general solution is presented. It has been revealed that coupled longitudinal and transverse waves propagate in the porous medium. The propagation of transverse waves in the fluid phase is completely due to the interaction between the solid and fluid phases. The dispersion relationship and attenuation features are discussed. Unlike other investigations, all explicit forms of the arguments are derived. The reflection of the plane harmonic waves at the plane, traction-free boundary, which shows the influence of the dissipation on the velocity, and the attenuation coefficients of the reflected waves is studied. It is of interest that pore pressure is produced in the process of reflection, even in the case of the incidence of transverse waves.     

Signal moments for the short‐time Fourier transform associated with Hardy–Sobolev derivatives

The short‐time Fourier transform has been shown to be a powerful tool for non‐stationary signals and time‐varying systems. This paper investigates the signal moments in the Hardy–Sobolev space that do not usually have classical derivatives. That is, signal moments become valid for non‐smooth signals if we replace the classical derivatives by the Hardy–Sobolev derivatives. Our work is based on the extension of Cohen's contributions to the local and global behaviors of the signal. The relationship of the moments and spreads of the signal in the time, frequency and short‐time Fourier domain are established in the Hardy–Sobolev space. Copyright © 2014 John Wiley & Sons, Ltd.     

Asymptotic expansions of the moments of extremes from general error distribution

In this paper, we derive the asymptotic expansions of the moments of normalized partial maxima for general error distribution. A byproduct is to deduce the convergence rates of the moments of normalized maxima to the moments of the corresponding extreme value distribution.     

Influence of surface and bulk layers on the crossover features for interaction parameters of a ferroelectric thin film

The phase diagram of a ferroelectric thin film is studied by using the usual mean-field approximation. The crossover features, from the ferroelectric-dominant phase diagram to the paraelectric-dominant phase diagram, for the physical parameters of the thin film are discussed. Special attention is devoted to the investigation of surface and bulk layers, and how to influence the crossover values of exchange interactions and transverse fields.     

反常磁矩对弱磁场弱相互作用费米气体热力学性质的影响

考虑费米子的反常磁矩, 运用赝势法和热力学理论, 导出弱磁场中弱相互作用费米气体自由能的解析式, 以此为基础给出高温和低温情况下系统热力学性质, 分析反常磁矩对热力学性质的影响机理. 研究表明: 反常磁矩对热力学性质的影响与温度相关, 而且这种影响随温度的上升在低温区是增大的, 在高温区是减小的; 对于系统的化学势、内能, 反常磁矩加强了磁场的影响, 弱化了相互作用的影响; 对于系统的热容量, 反常磁矩在低温区使其减小, 在高温区使其增加.     

R型铁氧体BaFe4-xTi2+xO11的化学组态以及磁性行为的研究

本文通过传统的固相反应法制备了R型六角铁氧体BaFe_4-xTi_2+xO₁₁ (x= 0, 0.25, 0.5, 0.75, 1), 并且对它的原子价态以及磁性行为进行了研究. X 射线光电子能谱(XPS)结果显示了随着掺杂含量的增加, 体系中Fe³⁺离子逐渐减少而Fe²⁺离子逐渐增加. 由于具有非对称结构的阻挫晶格中存在各种关联作用的竞争, 使得BaFe_4-xTi_2+xO₁₁体系表现出了复杂的磁有序行为, 在T₁～250 K和T₂～83 K两处存在磁转变. 对这一系列掺杂样品, 在相变温度T₁之上表现顺磁行为, 而在相变温度T₂前后的磁化强度都表现出低场下随磁场的增加快速增加, 高场下则线性变化且在5×10⁴ Oe时还未达到饱和的行为, 表明这一系列掺杂样品是典型的倾斜反铁磁态(canted antiferromagnetic) 或者亚铁磁态.     

电磁波在大面积等离子体片中传播特性的分析

脉冲磁约束线形空心阴极放电形成的大面积等离子体片可应用于等离子体天线、隐身及模拟超音速飞行器表面的等离子体鞘套. 本文首次利用实测等离子体片电子密度时空分布和横向场传播矩阵法, 研究了电磁波在等离子体片中反射率、透射率、吸收率随频率及脉冲放电时间的变化特征. 结果表明: 极化方向平行磁场的电磁波, 在小于截止频率的低频带内具有较高的反射率和吸收率, 增大电流, 反射率增加, 吸收率下降, 在大于截止频率的高频带内反射率和吸收率较低, 增大电流, 透射率下降, 吸收率升高; 极化方向垂直磁场的电磁波在高混杂谐振频率附近存在吸收率明显增强的吸收带, 谐振吸收峰值与放电电流无关; 脉冲放电期间, 电磁波的反射率、透射率与吸收率由不稳定过渡到稳定的时间约为100 μs, 过渡时间随着放电电流的增加而增大, 极化方向垂直磁场、小于截止频率的电磁波在稳定放电阶段谐振吸收较强. 本文的研究成果对利用等离子体片实现对电磁波的稳定高反射作用具有重要意义.     

多横模垂直腔面发射激光器及其波长特性

基于氧化限制型内腔接触垂直腔面发射激光器(VCSEL) 结构设计, 研究了VCSEL的多横模分布及其模式波长分裂特性与氧化孔径尺寸、形状的关系. 在实验基础上, 通过建立有效折射率模型, 并利用标量亥姆霍兹方程的迭代算法理论, 分别对椭圆形氧化孔径和圆形氧化孔径VCSEL的横向模式特性进行模拟研究, 计算得到不同形状孔径的多横模光场分布情况, 同时测量得到高阶横模多频输出光谱. 研究发现, 椭圆氧化孔形状不仅影响横模分布特性, 还会导致每个模式的波长产生分裂, 分裂值可达0.037 nm. 同时, 随着氧化孔径的增大, 波长分裂影响会逐渐减小, 直至趋近于圆形氧化孔径的分布特性. 研究结果为进一步实现氧化限制型VCSEL的多横模锁定提供了有益参考和借鉴.     

Optimized IR synchrotron beamline design

Synchrotron infrared beamlines are powerful tools on which to perform spectroscopy on microscopic length scales but require working with large bending‐magnet source apertures in order to provide intense photon beams to the experiments. Many infrared beamlines use a single toroidal‐shaped mirror to focus the source emission which generates, for large apertures, beams with significant geometrical aberrations resulting from the shape of the source and the beamline optics. In this paper, an optical layout optimized for synchrotron infrared beamlines, that removes almost totally the geometrical aberrations of the source, is presented and analyzed. This layout is already operational on the IR beamline of the Brazilian synchrotron. An infrared beamline design based on a SOLEIL bending‐magnet source is given as an example, which could be useful for future IR beamline improvements at this facility.     

Unsteady boundary layers with small cross flows

Despite the intensive development of computer technology and methods of solving the Navier-Stokes and Reynolds equations, the unsteady problems of the three-dimensional boundary layer are of significant interest in aerodynamics. So far these problems have been little studied as a result of objective difficulties related with the large dimensionality of the system of equations and the complexity of its investigation [{xc1}]. Therefore, analytic results in this field are important. In the present study the unsteady three-dimensional boundary layer equations are investigated in the case of small cross flows using the perturbation method. An intermediate system of equations, which includes the basic three-dimensional effects but is significantly simpler than the initial system is derived. The features of the formulation considered are studied in relation to the important practical problems of boundary layer flow past slender wings and weakly asymmetric bodies at small angles of attack.